Sandvik Incoloy 800H Welded Pipe manufacturer and suppliers

Sandvik alloy 800H Tubes, Sandvik alloy 800H Fittings, Sandvik alloy 800H Rods, Sandvik alloy 800H Fasteners, Sandvik alloy 800H plate, Sandvik alloy 800H sheet, Sandvik alloy 800H strip

Stockholder, Suppliers and Exporter of Sandvik Incoloy 800H Welded Pipe, Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H Inconel Pipe in India

Nickel Grades: UNS N04400UNS N06600UNS N06625UNS N08020UNS N08800UNS N08810 -UNS N08811UNS N08825UNS N10276UNS S31254

Contents:

Sandvik Logo

Sandvik Incoloy 800H Welded Pipe

Ashtapad Overseas maintains one of the world’s largest Sandvik Incoloy 800H Welded Pipe inventories, pipe & tubes inventories include Sandvik welded pipe, Sandvik tubing, Sandvik plate, Sandvik sheet, Sandvik strip, stainless steels pipe, Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H, duplex, super duplex, nickel & mixed alloys, carbon steels and low alloys pipes & tubes for energy and industrial applications.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001 & PED. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, SGC etc.

Ashtapad offers a wide range of Sandvik Incoloy 800H Welded Pipe, 316 Seamless Tubing316 Seamless Pipess 316l Seamless Pipe304 Seamless Tube304 Seamless Stainless Steel Tubing & Hydraulic Tube etc. We can meet most ASME, ASTM, AMS, and military specifications, and can cross-reference to most international standards, including full DIN 3.1b, full 3.1/3.2 Certifcation and NACE requirements.

Sandvik Incoloy 800H Welded Pipe Dimensional Range & Standard Specification

Looking for a Sandvik Incoloy 800H Welded Pipe supplier that offers quality products with fast turn around times at competitive prices? If so, you’ve come to the right place. Our products, including Nickel 600 and Alloys 625, 718, welded stainless steel and X750 are stored and pulled directly from warehouses. We stock and sell Sandvik Incoloy 800H Welded Pipe, this alloy is also available in form of Flat Bar, Forging Stock, Hexagon, Plate, Round Bar, Sheet, Strip and Wire. All the alloys are high temperature/corrosion resistant alloys that are often used in the aerospace industry.

Sandvik Incoloy 800H Welded Pipe
Sr. No.
Material
Size
Sch.
Specification
1
Sandvik Incoloy 800H Welded Pipe

15 NB
to
150 NB

Sch. 10
Sch. 40
Sch. 80 Etc.
IS
BS
ASTM
UNS

Trade Name Sandvik Incoloy 800H Welded Pipe
In Form of Round etc.
In Length of  Standard & Cut length
Value Added Service Draw & Expansion as per required Size & Length
Bending 
Annealed & Pickled 
Machining Etc. 
Test Certificate  Manufacturer Test Certificate 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection .
Specialize  Cupro Nickel Tube

Sandvik Incoloy 800H Welded Pipe sizes & stock

PIPE TUBE TYPE NB SIZES SCH 5 SCH 10 SCH 40 SCH 80 SCH 160
Sandvik Incoloy 800H Welded Pipe
1/8"
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
1/4"
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
3/8"
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
1/2"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
3/4"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
1"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
1 1/4"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
1 1/2"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
2"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
2 1/2"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
3"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
4"
available size
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
5"
available size
available size
available size
available size
Sandvik Incoloy 800H Welded Pipe
6"
available size
available size
available size
available size

All materials supplied by Ashtapad Overseas will meet or exceed ASTM, ASME, ANSI and/or API standards, per your required specifications including full documentation.
We have more than 1200 tons of Sandvik Incoloy 800H Welded Pipe in ready stock for immediate dispatch in our stockyard. Also we provide value addition to the client in the form of cut to length size, slitting, shaping, and fabrication, superior finishing, marking, beveled end, specialized cap protection.

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

Hot Products: Type 304 | Type 304L | Type 304H | Type 316 | Type 316L | Type 316H | Type 317L | Type 321 | Type 347 | Type 410 | Type 904L | UNS S32750 Duplex | UNS S32205 Duplex | UNS S31803 Duplex

Advantages of Sandvik Incoloy 800H Welded Pipe

  • Welded pipes are typically more cost effective than their seamless equivalents.
  • Welded pipes are usually more readily available than seamless. The longer lead time required for seamless pipes can not only make timing problematic, but it also allows more time for the price of the materials to fluctuate.
  • The wall thickness of welded pipes is generally more consistent than that of seamless pipes.
  • The internal surface of welded tubes can be checked before manufacturing, which isn’t possible with seamless.

Sandvik ANSI/ASME pipe, Sandvik Bimetallic tubes, Sandvik Boiler tubes, Sandvik Capillary tubes, Sandvik Chemical injection lines, Sandvik Coiled tubing, Sandvik Composite tubes, Sandvik Condenser tubes, Sandvik Control lines, Sandvik Downhole casing, Sandvik Ethylene furnace tubes, Sandvik Evaporator tubes, Sandvik Finned tubes, Sandvik Fittings, Sandvik Flanges, Sandvik Flowline piping, Sandvik Furnace tubes, Sandvik Gasoline direct injection (GDI) tubes, Sandvik Heat exchanger tubes, Sandvik High-pressure tubes, Sandvik High-temperature tubes, Sandvik Hollow bar, Sandvik Hydraulic tubing, Sandvik Instrumentation tubing, Sandvik ISO/EN tubes, Sandvik Lance tubes, Sandvik Mechanical tubing, Sandvik Medical tubes, Sandvik Muffle tubes, Sandvik Nuclear fuel tubes, Sandvik Nuclear steam generator tubing, Sandvik Precision tubes, Sandvik Production tubing (OCTG), Sandvik Recuperator tubes, Sandvik Reheater tubes, Sandvik Riser tubes, Sandvik Scrubber tubes, Sandvik Steam generator tubes, Sandvik Stripper tubes, Sandvik Subsea tubes, Sandvik Superheater tubes, Sandvik Thermocouple tubes, Sandvik Titanium tubes, Sandvik Umbilical tubes, Sandvik Zirconium tubes

Duplex stainless steels

Sandvik grade UNS ASTM EN no. W.-nr AFNOR
Sandvik 3RE60 S31500 - 1.4424 1.4417 Z2CND18-05-03
Sandvik SAF 2205 S31803/S32205 - 1.4462 - Z2CND22-05-03
Sandvik SAF 2304 S32304 - 1.4362 1.4362 Z2NC23-04AZ
Sandvik SAF 2707 HD S32707 - - - -
Sandvik SAF 2507 S32750 - 1.4410 - -

Sandvik High-alloy austenitic stainless steels and nickel alloys

Sandvik grade UNS ASTM EN steel no. W.-nr AFNOR
Sanicro 70 N06600 Alloy 600 - 2.4816 -
Sanicro 69 N06690 Alloy 690 2.4642*** 2.4642 NC30FE(RCCM)
Sanicro 41 N08825 Alloy 825 - 2.4858 -
Sanicro 30 N08800 - 1.4558 1.4558 -
Sanicro 28 N08028 - 1.4563 1.4563 -
Sandvik 2RK65 N08904 - 1.4539 1.4539 Z1NCDU25-20-4
254 SMO* S31254 - 1.4547 (1.4529)** -

* 254 SMO is a trademark of Outokumpu OY.
** In brackets, nearest equivalent steel grade
*** Not applicable for tube and pipe. Only for information.

Sandvik Austenitic stainless steels

Sandvik grade UNS ASTM EN steel no. W.-nr AFNOR
Sandvik 3R12 S30403/S30400 304L/304 1.4306/1.4301 1.4306/1.4301 Z2CN18-10
Sandvik 3R60 S31603/S31600 316L/316 1.4435/1.4436 1.4435/1.4436 Z2CND17-13
Sandvik 5R75 S31635 316Ti 1.4571 1.4571 (Z6CNDT17-12)**
Sandvik 6R35 S32100/S32109 321/321H 1.4541/1.4940 1.4541/1.4878 (Z6CNT18-10)**

Sandvik Incoloy 800H Welded Pipe price

Click here for stainless steel pipe price list (updated price list)

inconel المورد/ شراء 625 inconel الأنابيب
US $ 25-60 / كيلوغرام

inconel 625 سلس الأنابيب المورد
US $ 10-30 / كيلوغرام

inconel 625 الأنابيب الملحومة المورد
US $ 10-30 / كيلوغرام

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

send mail to Ashtapad to buy at Factory Rate

Useful Information:

Sanicro 31HT (Tube and pipe, seamless)

Datasheet updated 2015-03-10 12:56:07 (supersedes all previous editions)

Sanicro 31HT is an austenitic nickel-iron-chromium alloy characterized by:

  • High creep strength
  • Very good resistance to oxidation
  • Good resistance to combustion gases
  • Very good resistance to carburization
  • Good resistance to nitrogen absorption
  • Good structural stability at high temperatures
  • Good weldability

Sanicro 31HT can be used at temperatures up to about 1100°C (2010°F). In order to have the best ductility, it should be used above 700°C (1290°F).

The grade can also be supplied in a modified version for use in the temperature range between about 550 and 700°C (1020-1290°F). The chemical composition and heat treatment of this version have been adapted for the highest possible creep ductility. Contact us for further information.

Sanicro 31HT is not generally used under wet corrosive conditions. For this type of environment, we recommend Sanicro 30, which is specially adapted for wet corrosive conditions up to about 550°C (1020°F).

Standards

  • UNS N08810/N08811
  • EN number 1.4959/1.4876
  • EN name X8NiCrAlTi32-21
  • W.Nr. 1.4959*/1.4876**
  • DIN X 10 NiCrAlTi 32 20*/X 5 NiCrAlTi 31 20**/X 10 NiCrAlTi 32 20 H***

Product standards
Seamless tube and pipe

  • ASTM A213, A312, B163, B407
  • EN 10216-5, 10297-2
  • *) DIN 17459
  • **) SEW 470

Approvals
Approved for use in ASME Boiler and Pressure Vessel Code, Section I and VIII, Division 1, Case 1987-2 and Section I, case 1325-16.
***) VdTÜV-Werkstoffblatt 434 (Temp. >700°C)

Chemical composition (nominal) %

C Si Mn P S Cr Ni Ti Al Fe
0.07 0.6 0.6 ≤0.015 ≤0.010 20.5 30.5 0.5 0.5 bal.

By agreement the material can be delivered with a maximum cobalt content of 0.020%.

Forms of supply

Seamless tube and pipe – finishes and dimensions
Seamless tube and pipe in Sanicro 31HT is supplied in dimensions up to 260 mm outside diameter in the solution annealed and white-pickled condition.
Pigtail tubes, which are solution annealed after bending are supplied unpickled.

Stock sizes
Sanicro 31HT is stocked in sizes from 3/8" to 2" outside diameter. Additional data concerning sizes and finishes is available on request from your nearest Sandvik office.

Other forms of supply
Welding wire
Covered electrodes
Billets

Mechanical properties

At 20°C (68°F)

Proof strength Tensile Strength Elong. Hardness
Rp0.2 1) Rp1.0 1) Rm A2) A2" HRB
MPa MPa MPa % %
Metric units
≥172 ≥200 500-700 ≥35 ≥30 ≤90

1 MPa = 1 N/mm2

Proof strength Tensile Strength Elong. Hardness
Rp0.2 1) Rp1.0 1) Rm A2) A HRB
ksi ksi ksi % %
Imperial units
≥25 ≥29 73-102 ≥35 ≥30 ≤90

1) Rp0.2 and Rp1.0 correspond to 0.2% offset and 1.0% offset yield strength, respectively.
2) Based on L0 = 5.65 √S0 where L0 is the original gauge length and S0 the original cross-sectional area.

At high temperatures

Temperature Proof strength Tensile strength
Rp0.2 Rp1.0 Rm
°C MPa MPa MPa
min. min. min.
Metric units
100 150 175 415
200 130 155 385
300 120 145 375
400 110 135 370
500 105 125 360
600 95 115 345
700 90 110 295
Temperature Proof strength Tensile strength
Rp0.2 Rp1.0 Rm
°F ksi ksi ksi
min. min. min.
Imperial units
200 22.0 25.7 60.7
400 18.9 22.5 55.9
600 17.1 20.8 54.3
800 15.8 19.2 53.3
1000 14.6 17.6 51.4
1200 13.5 16.4 46.6
1400 12.8 15.2 40.9

Creep strength

Metric units Imperial units

Temperature, °C MPa Temperature, °F ksi
Creep rupture strength 1)
600 127 1100 19.2
625 106 1150 15.9
650 88 1200 12.9
675 71 1250 10.2
700 57 1300 8.0
750 40 1400 5.4
800 27 1500 3.6
850 19 1600 2.4
900 13 1700 1.6
950 8.6 1800 1.0
1000 6.2 1900 0.7
1050 4.0 2000 0.4
1100 2.7

1) 100 000 h, average values

The above values generally exceed the corresponding data contained in ASME Code Case 1987 and VdTÜV-Wb 434.

Physical properties

Density: 7.9 g/cm3, 0.29 lb/in3

Temperature, °C J/kg °C Temperature, °F Btu/lb °F
Specific heat capacity
20 470 68 0.11
100 495 200 0.12
200 520 400 0.12
300 545 600 0.13
400 570 800 0.14
500 585 1000 0.14
600 605 1200 0.15
700 615 1400 0.15
800 630 1600 0.15
900 640 1800 0.15
1000 655 2000 0.16
1100 665
Temperature, °C W/m °C Temperature, °F Btu/(ft h °F)
Thermal conductivity
20 12 68 6.5
100 13 200 7.5
200 16 400 9
300 17 600 10
400 19 800 11.5
500 21 1000 12.5
600 22 1200 13.5
700 24 1400 14
800 25 1600 15
900 26 1800 16
1000 28 2000 16.5
1100 29
Temperature, °C Per °C Temperature, °F Per °F
Thermal expansion 1)
30-100 15 86-200 8.5
30-200 16 86-400 9
30-300 16.5 86-600 9
30-400 16.5 86-800 9.5
30-500 17 86-1000 9.5
30-600 17 86-1200 9.5
30-700 17.5 86-1400 10
30-800 18 86-1600 10
30-900 18 86-1800 10.5
30-1000 18.5

1) Mean values in temperature ranges (x10-6)

Temperature, °C µΩm Temperature, °F µΩin.
Resistivity
20 0.99 68 38.9
100 1.01 200 39.9
200 1.03 400 40.5
300 1.05 600 41.4
400 1.08 800 43.0
500 1.12 1000 45.1
600 1.18 1200 46.9
700 1.21 1400 48.0
800 1.22 1600 48.3
900 1.23 1800 48.7
1000 1.24
Temperature, °C MPa Temperature, °F ksi
Modulus of elasticity 1)
20 200 68 29.0
200 190 400 27.5
400 175 800 25.0
600 160 1200 22.5
800 145 1400 21.5
1000 130 1800 19.0

1) (x103)

Corrosion resistance

Air

Sanicro 31HT is highly resistant to oxidation, both at constant and at cyclically varying temperatures. See Fig. 2. The service temperature in air should not exceed about 1100°C (2010°F).

Isothermal oxidation at 1100°C (2010°F) for 100h results in a corrosion rate of about 0.8 mm/year (32 mpy) and exposure at the same temperature for 1000 h causes about 0.2 mm/year (8 mpy). This corresponds to an oxide layer of about 0.1 mm (0.004 in.) thickness after the first year, in accordance with the law of parabolic growth.

Cyclic oxidation at 1100°C (2010°F) for 5 x 24 h, with cooling to room temperature every 24 hours gives a corrosion rate of less than 1.9 mm/year (75 mpy). The corresponding corrosion rate at 1150°C (2100°F) is less than 2.3 mm/year (92 mpy). The oxidation process is accelerated by temperature fluctuations and also by plastic deformation, e.g. creep.

Wet corrosion

Sanicro 31 HT has roughly the same resistance as Alloy 800 to general corrosion and pitting. Thanks to the high nickel content its resistance to stress corrosion is good.

Owing to its relatively high carbon content and the heat treatment applied, Sanicro 31HT can be prone to intergranular corrosion. This problem can be disregarded where high temperature operation is concerned, but should be observed in cases when the alloy is exposed to corrosive condensates or pickling solutions.

Structural stability

Thanks to its high nickel content, Sanicro 31HT shows very little tendency to precipitate embrittling phases.

Within the 600-700°C (1110-1290°F) temperature range, an intermetallic phase, gamma prime, Ni3 (Al, Ti), is precipitated, which reduces the ductility of the alloy. To avoid this precipitation some specifications prescribe maximization of the (Ti + Al) content.

Sandvik supplies a modified version of Sanicro 31HT in which chemical composition and heat treatment have been adapted to meet this requirement and give the highest possible creep ductility.

Heat treatment

Tubes are delivered in the heat treated condition. If another heat treatment is needed after further processing the following is recommended:

Solution annealing

1150-1200°C (2100-2190°F), 10-30 minutes, rapid cooling in air or water.

Welding

The weldability of Sanicro 31HT is good. Suitable welding methods are manual metal-arc welding with covered electrodes and gas shielded arc welding, with the TIG and MIG methods as first choice. Preheating and post-weld heat treatment are not necessary.

The welding of high nickel materials calls for special cleanliness. Joint surfaces and filler metals have to be free from grease, dirt and other impurities. If necessary, the area to be welded should be cleaned with a suitable solvent, e.g. acetone.

Since the material has low thermal conductivity and high thermal expansion, welding should be carefully planned in advance, so that distortion of the welded joint can be kept under control.

Welding of fully austenitic steels often entails the risk of hot-cracking in the weld metal, particularly if the weldment is under constraint. To reduce the cracking risk, welding should be carried out with a low heat input.

As filler metal for gas shielded arc welding, we recommend Sanicro 72HP wire electrodes and rods. In manual metal-arc welding Sanicro 71 covered electrodes are recommended. These filler metals have a high nickel content and, therefore, lower creep strength than the parent metal at temperatures exceeding about 800°C (1470°F), and its resistance to sulphurous media is inferior in certain cases. Other filler materials with higher creep strength and better resistance to sulphidation are available and can be recommended on request.

Bending

Annealing after cold bending is not normally necessary, but this should be reviewed depending on the degree of bending and the operating conditions. Figure 5 shows the connection between the degree of deformation, service temperature and creep rupture strength at 100 000 h for Sanicro 31HT. The curves are based on data from creep tests at 700, 800 and 900°C (1290, 1470 and 1650°F respectively). For degrees of deformation and service temperatures exceeding the curve for 100% creep strength, we recommend solution annealing after cold working in order to achieve the highest possible creep strength. Further information can be supplied on request.

Hot bending is carried out at 1100-850°C (2010-1560°F) and should be followed by solution annealing.

Applications

Sanicro 31HT has high strength and structural stability at high temperature and very good ductility. The most common applications for this grade are :

  • Pigtails and headers in plants for the production of synthetic gas for ammonia, methanol and town gas
  • Furnace tubes in the production of vinyl chloride, ethylene and radiant tubes
  • Heat exchanger tubing for fluidized bed combustion
  • Muffle tubes in continuous wire annealing furnaces
  • Thermocouple protection tubes

We are exporting Sandvik Incoloy 800H Welded Pipe to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, India, Sudan, Syria, Morocco, Libya, Jordon, and many more..

We also have our sales representatives to understand the requirements of our clients, we maintain ready stock of Sandvik Incoloy 800H Welded Pipe in cities like Abu Dhabi, Riyadh, Manama, Muscat, Doha, Dubai, Damascus, Khartoum, Beirut, Jeddah, Aleppo, Alexandria, Algiers, Amman, Mosul, Cairo, Baghdad, Dammam, Casablanca, Basra, Mecca, Tripoli, Rabat, Sana’a, Arbil, Hilla, Port Said, Marrakech, Medina, Al Hudaydah, Omdurman, Damietta, Homs, Kafr Dawar, Benghazi, Fez, Bahri, Nouakchott, Sulaymaniyah, Safi, Zarqa, Oran, Kirkuk, Ismailia, Tunis, Agadir, Tangier, Sharjah, Shibin El Kom, Misratah, Matrah, Aden, Najaf, Karbala, Latakia, Sousse, Meknes, Gaza, Fallujah, Aswan, Kassala, Al-Ubayyid, Sohag, Kuala Lumpur, Penang, Kuching & many more..

Our worldwide presence:

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo, Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherlands, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

other brand manufacturer’s pipe & tubes also available

stainless steel pipe manufacturers

 

Ashtapad Overseas Logo
Ashtapad Overseas
Address:
204, 2nd Floor,Gods Gift Tower,
1st Carpenter Street, Mumbai – 400004, Maharashtra, India.
Tel: +91-22-23841700, 67437666, 66595333
Email: ashtapad@vsnl.net
Website: www.ashtapadoverseas.com
Fax: +91-22-23868298

Tags: Sandvik Incoloy 800H Welded Pipe, best quality Sandvik Incoloy 800H Welded Pipe, wide variety of Sandvik Incoloy 800H Welded Pipe, Sandvik Incoloy 800H Welded Pipe India, Sandvik Incoloy 800H Welded Pipe distributor Mumbai, Sandvik Incoloy 800H Welded Pipe traders, prime quality Sandvik Incoloy 800H Welded Pipe, Sandvik Incoloy 800H Welded Pipe exporter, Source for Sandvik Incoloy 800H Welded Pipe, specialize in Sandvik Incoloy 800H Welded Pipe, Sandvik Incoloy 800H Welded Pipe with Test Certificate, Sandvik Incoloy 800H Welded Pipe manufacturers, Sandvik Incoloy 800H Welded Pipe manufacturer & suppliers, Sandvik Incoloy 800H Welded Pipe importer, Sandvik Incoloy 800H Welded Pipe exporter, Sandvik Incoloy 800H Welded Pipe dealers, Sandvik Incoloy 800H Welded Pipe mill, Sandvik Incoloy 800H Welded Pipe price, Sandvik Incoloy 800H Welded Pipe ready stock, used Sandvik Incoloy 800H Welded Pipe, Sandvik Incoloy 800H Welded Pipe manufacturing process, Brand Steel Pipes stockist, send your Sandvik Incoloy 800H Welded Pipe requirement to our Mumbai, India office by email ashtapad@vsnl.net, ISO 9001, ISO 14001, OHSAS 18001 certified & Government Recognized Export House, Seamless Pipes and Tubes for the Chemical Industry (Stainless Steel and Ni-based Alloys), Sandvik Sanicro 28, Sandvik Sanicro 60, Sandvik Sanicro 31HT, Sandvik Sanicro 41, Sandvik Sanicro 61, Sandvik Sanicro 70, Sandvik Sanicro 31H