ASTM A403 WP317 Stainless Steel Buttweld Fittings manufacturer and suppliers

ASTM A403 WP317 Stainless Steel Buttweld Fittings, SS317 Elbow, wp317 Elbow, SS 317 Tee, SS 317 reducers manufacturer & supplier In India

Manufacturer, Supplier and Exporter of ASTM A403 WP317 Stainless Steel Buttweld Fittings in India

SS Grades: WP304WP 304LWP 304HWP 304LNWP 304NWP316WP 316LWP 316HWP317WP 317LWP321WP 321HWP347WP 347HWPS 31254

Contents:

ASTM A403 WP317 Stainless Steel Buttweld Fittings

Since 2004, Ashtapad Overseas has manufactured ASTM A403 WP317 Stainless Steel Buttweld Fittings, flange, elbow, tee, reduction, caps, forged fitting materials for oil and natural gas pipelines, refinery and petro chemistry facilities, nuclear power and electricity production plants, refinement and extrication plants, dams and hydroelectric power plants and shipbuilding industry. Ashtapad Overseas is a largest manufacturer, supplier & exporter of pipe fitting pieces and fabrication since the company’s superior technology in world standards and quality.

Ashtapad Overseas is among the leading companies in the sector of manufacturing ASTM A403 WP317 Stainless Steel Buttweld Fittings, pipe fittings & flanges with its superior technology in compatible with the world standards, and has been the choice of many professionals and companies. Ashtapad has a capacity of fulfilling all the demands of the sector through the manufacture of carbon steel, stainless steel, alloy steel and specific steel groups.

We offer wide gamut of ASTM A403 WP317 Stainless Steel Buttweld Fittings that are widely used in diverse industries. Fittings and flanges of SS 304 / 304L are made available on request of the customers. Can be made available in forms of Reducers – Concentric / Eccentric, Elbows, Tees, Caps, Stub Ends, Flanges, Fasteners, etc. Our gamut of products conform various standards such as the varied grades of stainless steel butt weld fittings that we supply are.

Standard: ASTM / ASME A/SA 403 GR WP "S" / "W" / " WX"
Grade: 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. .

ASTM A403 WP317 Stainless Steel Buttweld Fittings Dimensional Range & Standard Specification

Specification:

Standards Designation Specification
ASTM A 403 ANSI B16.9
ASME SA 403

Origin: West Europe / Japan / Indian / USA / Korean

BW fittings manufacturing range

Range    
from ½” to 16” – from sch. 10s to sch. XXS
     
Grades    
Stainless steel fittings ASTM/ASME A/SA 403 WP 304/304L, WP 316/316L, WP 321/321H, WP 304H, WP 347/347H, WP 316H, WP 310S, WP 317L, WP 316L UG (UNS S31603), WP 25.22.2 (UNS S31050)
Duplex fittings
Superduplex fittings
ASTM/ASME A/SA 815
ASTM/ASME A/SA 815
UNS S31803/S32205
UNS S32760 & UNS S32750
Ssuperaustenitics fittings ASTM/ASME B/SB 366
ASTM/ASME A/SA 403
UNS N08904 (904L)
UNS S31254 (6Mo)
Nickel alloys fittings ASTM/ASME B/SB 366 ALLOY 200, 201, 400, 600, 625, 800/H/T, 825, 276,
UNS N08925, UNS N08020, amongst others


Test Certificates: 
Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

ASTM A403 WP317 Stainless Steel Buttweld Fittings Welded (ERW) Buttweld Fittings

ASTM/ASME | A403/SA403 | WP-W | ANSI B16.9/MSS SP-43

GRADE SCHEDULE NOM. PIPE SIZE
WP 317/ 317L-W SCH 10S 1/2" – 24"
  SCH 40S 1/2" – 12"
     
WP 317/ 317L-W SCH 10S 1/2" – 24"
  SCH 40S 1/2" – 12"

ASTM A403 WP317 Stainless Steel Buttweld Fittings Seamless Fittings

ASTM/ASME | A403/SA403 | WP-S | ANSI B16.9/MSS SP-43

NACE MR 01-75 | ASTM A262E | PMI TESTED

CERTIFICATE EN 10204/3.1B
GRADE SCHEDULE NOM. PIPE SIZE
WP 317/ 317L-S SCH 10S 1/2" – 12"
  SCH 40S 1/2" – 12"
  SCH 80S 1/2" – 12"
     
WP 317/ 317L-S SCH 10S 1/2" – 12"
  SCH 40S 1/2" – 12"
  SCH 80S 1/2" – 12"

Type of ASTM A403 WP317 Stainless Steel Buttweld Fittings we manufacture:

Manufacturer of
Size
ASTM A403 WP317 stainless steel 90° Elbow
ASTM A403 WP317 stainless steel 45° Elbow
ASTM A403 WP317 stainless steel Long Radius Elbow
ASTM A403 WP317 stainless steel Short Radius Elbow
ASTM A403 WP317 stainless steel Reducing Elbow
ASTM A403 WP317 stainless steel 3D Elbow
ASTM A403 WP317 stainless steel 5D Elbow
ASTM A403 WP317 stainless steel Tee (Equal & Unequal)
ASTM A403 WP317 stainless steel Fabricated Tee
ASTM A403 WP317 stainless steel Cross
ASTM A403 WP317 stainless steel Reducing Crosses
ASTM A403 WP317 stainless steel Full Coupling
ASTM A403 WP317 stainless steel Half Coupling
ASTM A403 WP317 stainless steel Pipe Cap
ASTM A403 WP317 stainless steel Union
ASTM A403 WP317 stainless steel Stub Ends (Long & Short)
ASTM A403 WP317 stainless steel 180° LR Return Bends
ASTM A403 WP317 stainless steel 180° SR Return Bends
ASTM A403 WP317 stainless steel Pipe Bends / Piggable Bends
ASTM A403 WP317 stainless steel Couplings
ASTM A403 WP317 stainless steel Pipe Nipples (Barrel)
ASTM A403 WP317 stainless steel Forged/ Plate Cut Rings
ASTM A403 WP317 stainless steel End Caps
ASTM A403 WP317 stainless steel Forged / Plate Circles
ASTM A403 WP317 stainless steel Reducer Insert
ASTM A403 WP317 stainless steel Reducers
ASTM A403 WP317 stainless steel Concentric Reducer
ASTM A403 WP317 stainless steel Eccentric Reducer
ASTM A403 WP317 stainless steel Boss
ASTM A403 WP317 stainless steel Branch Outlet
ASTM A403 WP317 stainless steel 90° Elbow Outlet
ASTM A403 WP317 stainless steel 45° Lateral Tee
ASTM A403 WP317 stainless steel Lateral Outlet
ASTM A403 WP317 stainless steel Branch Outlet Buttweld
ASTM A403 WP317 stainless steel 90° Elbow Outlet Buttweld
ASTM A403 WP317 stainless steel Lateral Outlet Buttweld
ASTM A403 WP317 stainless steel Nipple Branch Outlet Buttweld
ASTM A403 WP317 stainless steel Dairy Fitting
Sizes 1/2" – 48"

Test Certificate
With Manufacturer Test Certificate 
Under Third Party Inspection

PRESSURE CLASS
3000 – 6000 – 9000LB

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

ASTM A403 WP317 Stainless Steel Buttweld Fittings price

Click here for stainless steel pipe price list (updated price list)

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

send mail to Ashtapad to buy at Factory Rate  

Useful Information:

Stainless Steel Tradename UNS no. Werkstoff No.
317L 317L Stainless S31703 1.4438

Key Properties of ASTM A403 WP317 Stainless Steel Buttweld Fittings

  • High corrosion resistance in tough environments
  • Lower intergranular precipitation
  • High resistance to pitting and crevice corrosion

Common Applications ASTM A403 WP317 Stainless Steel Buttweld Fittings

  • Pulp and paper manufacturing plants
  • Chemical processing equipment
  • Petrochemical processing equipment
  • Textile machinery and equipment
  • Vessels and tanks

317L is an molybdenum-bearing austenitic stainless steel, with greatly increased resistance to chemical attack as composed to the conventional chromium-nickel austenitic steel tubes as 304L & 316L. the addition of molybdenum gives alloy 317L tubing improved resistance to chloride and other halides. Due to its low carbon content the 317L tubing can be welded without risk of sanitization due to inter granular corrosion that can result from chromium carbide precipitation in the grain boundaries. 317L is non magnetic in the annealed condition, but may become slightly magnetic as result of welding.

Technical details

Technical composition (%) Fe Cr Ni Mo Mn Si P C S
317L min Bal. 18.0 11.0 3.0 - - - - -
  max - 20.0 15.0 4.0 2.00 1.00 0.040 0.035 0.030

Mechanical properties 317L
Tensile strenght (mpa, min) 515 – 750
Yield strength (0.2% offset mpa, min) 205
Elongation (%, min) 35
Density / weight (g / cm3 / kg) 7.90

High molybdenum and nitrogen contents can significantly improve pitting resistance as illustrated in the preceding table of Pitting Resistance Equivalents (PRE). The PRE is based on the results of corrosion tests in which it was found that nitrogen was 30 times more effective than chromium and approximately 9 times more effective than molybdenum in enhancing chloride pitting resistance.

The temperature of the onset of crevice corrosion as determined in a modified AST G-48B test is a useful means of ranking the relative resistance of stainless and nickel-base alloys. The Critical Crevice Corrosion Temperatures table that follows demonstrates that crevice corrosion resistance for austenitic stainless steels increases with the alloy’s molybdenum and nitrogen content.

Crevice Corrosion in a Simulated
FGD System Environment

Alloy

Weight Loss (g/cm2)
for Tests* at Cited Temperatures

24°C
(75°F)

50°C
(122°F)

70°C
(158°F)

Alloy 317L

0.0007

0.0377

0.0500

Alloy 317LMN

0.0000

0.0129

0.0462

Alloy 625

0.0000

0.0000

0.0149

Alloy C276

0.0000

0.0001

0.0004

*72-hour exposure based on ASTM G-48B procedure using the following solution:
7 vol.%H2SO4, 3 vol%HCI, 1 wt% CuCl2, 1 wt%FeCl3
Oxidation Resistance
The chromium-nickel-molybdenum steels all have excellent resistance to oxidation and a low rate of scaling in ordinary atmospheres at temperatures up to 1600-1650 °F (871-899 °C).
Fabrication
The physical and mechanical properties of 317LMN and Alloy 317L stainless steels are similar to those of more conventional austenitic stainless steels and can, therefore, be fabricated in a manner similar to Alloys 304 and 316.

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo, Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherlands, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

ASTM A403 WP317 Stainless Steel Buttweld Fittings other brand manufacturers

ASTM A403 WP317 Stainless Steel Buttweld Fittings manufacturers

  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Erne Fittings, Austria
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Metalfar, Italy
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Lame S.r.l., Italy
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | BKL- Thai Benkan, Thailand
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | BENKAN Corporation, Japan
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | TecnoForge, Italy
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Ulma, Spain
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Mega, Italy
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Melesi, Italy
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Interfit, France
  • ASTM A403 WP317 Stainless Steel Buttweld Fittings | Raccortubi S.p.A., Italy

Tags: ASTM A403 WP317 Stainless Steel Buttweld Fittings, best quality ASTM A403 WP317 Stainless Steel Buttweld Fittings, wide variety of ASTM A403 WP317 Stainless Steel Buttweld Fittings, ASTM A403 WP317 Stainless Steel Buttweld Fittings India, ASTM A403 WP317 Stainless Steel Buttweld Fittings distributor Mumbai, ASTM A403 WP317 Stainless Steel Buttweld Fittings traders, prime quality ASTM A403 WP317 Stainless Steel Buttweld Fittings, ASTM A403 WP317 Stainless Steel Buttweld Fittings exporter, Source for ASTM A403 WP317 Stainless Steel Buttweld Fittings, specialize in ASTM A403 WP317 Stainless Steel Buttweld Fittings, ASTM A403 WP317 Stainless Steel Buttweld Fittings with Test Certificate, ASTM A403 WP317 Stainless Steel Buttweld Fittings manufacturers, ASTM A403 WP317 Stainless Steel Buttweld Fittings suppliers, ASTM A403 WP317 Stainless Steel Buttweld Fittings dealers, ASTM A403 WP317 Stainless Steel Buttweld Fittings mill, ASTM A403 WP317 Stainless Steel Buttweld Fittings price, ASTM A403 WP317 Stainless Steel Buttweld Fittings ready stock, used ASTM A403 WP317 Stainless Steel Buttweld Fittings, ASTM A403 WP317 Stainless Steel Buttweld Fittings manufacturing process, send your ASTM A403 WP317 Stainless Steel Buttweld Fittings requirement to our Mumbai, India office by email ashtapad@vsnl.net, ISO 9001, ISO 14001, OHSAS 18001 certified & Government Recognized Export House