ASTM B366 WP 904L Stainless Steel Socket weld fittings manufacturer and suppliers

ASTM B366 WP 904L Stainless Steel Socket weld fittings, SS 904L Tee, wp 904L Elbow SS 904L Union Manufacturer & Suppliers In India

Manufacturer, Supplier and Exporter of ASTM B366 WP 904L Stainless Steel Socket weld fittings in India

SS Grades: WP304WP 304LWP 304HWP 304LNWP 304NWP316WP 316LWP 316HWP317WP 317LWP321WP 321HWP347WP 347HWPS 31254

Contents:

ASTM B366 WP 904L Stainless Steel Socket weld fittings

Since 2004, Ashtapad Overseas has manufactured ASTM B366 WP 904L Stainless Steel Socket weld fittings, flange, elbow, tee, reduction, caps, forged fitting materials for oil and natural gas pipelines, refinery and petro chemistry facilities, nuclear power and electricity production plants, refinement and extrication plants, dams and hydroelectric power plants and shipbuilding industry. Ashtapad Overseas is a largest manufacturer, supplier & exporter of pipe fitting pieces and fabrication since the company’s superior technology in world standards and quality.

Ashtapad Overseas is among the leading companies in the sector of manufacturing ASTM B366 WP 904L Stainless Steel Socket weld fittings, pipe fittings & flanges with its superior technology in compatible with the world standards, and has been the choice of many professionals and companies. Ashtapad has a capacity of fulfilling all the demands of the sector through the manufacture of carbon steel, stainless steel, alloy steel and specific steel groups.

We offer wide gamut of ASTM B366 WP 904L Stainless Steel Socket weld fittings that are widely used in diverse industries. Fittings and flanges of SS 304 / 304L are made available on request of the customers. Can be made available in forms of Reducers – Concentric / Eccentric, Elbows, Tees, Caps, Stub Ends, Flanges, Fasteners, etc Our gamut of products conform various standards such as the varied grades of stainless steel butt weld fittings that we supply are.

Standard: ASTM / ASME A/SA 403 GR WP "S" / "W" / " WX"
Grade: 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L. .

ASTM B366 WP 904L Stainless Steel Socket weld fittings Dimensional Range & Standard Specification

Specification:

Standards Designation
ASTM B 366
ASME SB 366

Origin: West Europe / Japan / Indian / USA / Korean

ASTM B366 WP 904L Stainless Steel Socket weld fittings Production Range

Specification ASTM A182 & ASME SA182
Type Seamless / Welded / Fabricated
Variants 904L, SS 904L, WP 904L
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom
Range ½”NB to 48”NB in Sch 10s, 40s, 80s, 160s, XXS.
Dimensions ANSI/ASME B16.9, B16.28, MSS-SP-43.

Test Certificates: Manufacturer Test Certificate as per EN 10204 / 3.1B, Raw Materials Certificate, 100% Radiography Test Report, Third Party Inspection Report

Type of ASTM B366 WP 904L Stainless Steel Socket weld fittings we manufacture:

High Pressure Forged Pipe Fittings / Threaded and Socket Weld Pipe Fittings

Manufacturer of Size
ASTM B366 WP 904L stainless steel 90° Elbows ASTM B366 WP 904L stainless steel Couplings

Sizes 1/8" – 4"

Pressure Ratings –
2000 LBS, 3000 LBS, 6000 LBS, 9000 LBS

ASTM B366 WP 904L stainless steel 45° Elbows ASTM B366 WP 904L stainless steel Reducers
ASTM B366 WP 904L stainless steel Street Elbows ASTM B366 WP 904L stainless steel Inserts
ASTM B366 WP 904L stainless steel Tees ASTM B366 WP 904L stainless steel Caps
ASTM B366 WP 904L stainless steel Crosses ASTM B366 WP 904L stainless steel Unions

We are specialized in:

  1. Flanges according to ASTM A182 Grade F304, F304L F316L
  2. Pipes according to ASTM A312 Grade TP304, TP304L, TP3016L
  3. Fittings according to ASTM A403 Grade WP304, WP304L, WP316L

ASTM B366 WP 904L Stainless Steel Socket weld fittings price

Click here for stainless steel pipe price list (updated price list)

ASTM A312 TP 310 Stainless Steel Welded Pipe at Factory price

send mail to Ashtapad to buy at Factory Rate  

Useful Information:

904L is a low carbon high alloy austenitic stainless steel, with an chromium, nickel, molybdenum and copper content, which is widely used in applications where the corrosion properties of 316L & 317L are not adequate. although originally develop for greatly improved resistance to strong reducing acids, particularly sulphuric acid. It also has an very high resistance to a wide range of environments. This feature has been verified that it is very successful after many years of practical applications, which has results that 904L has been standardized in many countries.

904L is a non-stabilised low carbon high alloy austenitic stainless steel. The addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly sulphuric acid. It is also highly resistant to chloride attack – both pitting / crevice corrosion and stress corrosion cracking. This grade is non-magnetic in all conditions and has excellent weldability and formability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. 904L does have very substantial contents of the high cost ingredients nickel and molybdenum. Many of the applications in which this grade has previously performed well can now be fulfilled at lower cost by duplex stainless steel 2205 (S31803 or S32205), so it is used less commonly than in the past.

Characteristics

  • The high Mo and the addition of copper to this grade gives it greatly improved resistance to strong reducing acids, particularly aspheric acid
  • It is highly resistant to chloride attack, both pitting crevice corrosion and stress corrosion crashing
  • Good machine ability and weld ability
  • The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures

Market applications:

  • Offshore, oil & gas
  • Chemical processes
  • Seawater cooling equipment
  • Control and instrumentation
  • Pharmaceutical
  • Pulp and paper processing

Technical details

Technical composition (%)
Fe
Cr
Ni
Mo
Mn
Cu
Si
P
N
C
S
904L min
Bal.
19.0
23.0
4.0
-
1.0
0.045
-
-
-
-
  max
-
23.0
28.0
5.0
2.0
2.0
1.00
0.045
0.10
0.020
0.015
Mechanical properties
904L
Tensile strenght (mpa, min)
490 – 700
Yield strength (0.2% offset mpa, min)
220
Elongation (%, min)
35
Density / weight (g / cm3 / kg)
8.05

Grade specifications for 904L grade stainless steels.

Grade

UNS No

Old British

Euronorm

Swedish SS

Japanese JIS

BS

En

No

Name

904L

N08904

904S13

-

1.4539

X1NiCrMoCuN25-20-5

2562

-

These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.

Possible alternative grades to 904L stainless steel.

Grade

Why it might be chosen instead of 904L

316L

A lower cost alternative, but with much lower corrosion resistance.

6Mo

A higher resistance to pitting and crevice corrosion resistance is needed.

2205

A very similar corrosion resistance, with the 2205 having higher mechanical strength, and at a lower cost to 904L. (2205 not suitable for temperatures above 300°C.)

Super duplex

Higher corrosion resistance is needed, together with a higher strength than 904L.

Heat Resistance
Good resistance to oxidation, but like other highly alloyed grades suffers from structural instability (precipitation of brittle phases such as sigma) at elevated temperatures. 904L should not be used above about 400°C.
Heat Treatment
Solution Treatment (Annealing) – heat to 1090-1175°C and cool rapidly. This grade cannot be hardened by thermal treatment.
Welding
904L can be successfully welded by all standard methods. Care needs to be taken as this grade solidifies fully austenitic, so is susceptible to hot cracking, particularly in constrained weldments. No pre-heat should be used and in most cases post weld heat treatment is also not required. AS 1554.6 pre-qualifies Grade 904L rods and electrodes for welding of 904L.
Fabrication
904L is a high purity, low sulphur grade, and as such will not machine well. Despite this the grade can be machined using standard techniques.
Bending to a small radius is readily carried out. In most cases this is performed cold. Subsequent annealing is generally not required, although it should be considered if the fabrication is to be used in an environment where severe stress corrosion cracking conditions are anticipated.

Cities We Deliver To: Mumbai, Bengaluru, Chennai, New Delhi, Pimpri-Chinchwad, Houston, Dubai, Seoul, Hyderabad, Singapore, Abu Dhabi, Pune, Kolkata, Gurgaon, Navi Mumbai, Ahmedabad, Tehran, Calgary, Noida, Riyadh, Vadodara, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Thane, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, Surat, Bhopal, Ulsan, Faridabad, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, Howrah, Sydney, Ahvaz, Karachi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo, Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri

Countries We Deliver To: India, United States, United Arab Emirates, Canada, Pakistan, Peru, Chile, Spain, France, United Kingdom, Indonesia, Israel, Iran, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Saudi Arabia, Netherlands, Brazil, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Russia, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Angola, Argentina, Austria, Azerbaijan, Bangladesh, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia

Europe: Germany, Netherlands, Russia Finland, Czech, Ukraine, Italy, Spain, Poland
Middle East:Iran, UAE, SA, Iraq, Qatar, Isreal, Jordan, Bahrain, Kuwait
South America:Brazil, Chile, Peru, Venezuela, Uruguay, Argentina
Africa: Egypt, South Africa, Nigeria
Central & North America:Mexico, US, Canada, Costa Rica
South East Asia and Pacific:Japan, South Korea, Singapore, Thailand, Indonesia, Australia

ASTM B366 WP 904L Stainless Steel Socket weld fittings other brand manufacturers

ASTM B366 WP 904L Stainless Steel Socket weld fittings manufacturers

  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Erne Fittings, Austria
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Metalfar, Italy
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Lame S.r.l., Italy
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | BKL- Thai Benkan, Thailand
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | BENKAN Corporation, Japan
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | TecnoForge, Italy
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Ulma, Spain
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Mega, Italy
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Melesi, Italy
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Interfit, France
  • ASTM B366 WP 904L Stainless Steel Socket weld fittings | Raccortubi S.p.A., Italy

Tags: ASTM B366 WP 904L Stainless Steel Socket weld fittings, best quality ASTM B366 WP 904L Stainless Steel Socket weld fittings, wide variety of ASTM B366 WP 904L Stainless Steel Socket weld fittings, ASTM B366 WP 904L Stainless Steel Socket weld fittings India, ASTM B366 WP 904L Stainless Steel Socket weld fittings distributor Mumbai, ASTM B366 WP 904L Stainless Steel Socket weld fittings traders, prime quality ASTM B366 WP 904L Stainless Steel Socket weld fittings, ASTM B366 WP 904L Stainless Steel Socket weld fittings exporter, Source for ASTM B366 WP 904L Stainless Steel Socket weld fittings, specialize in ASTM B366 WP 904L Stainless Steel Socket weld fittings, ASTM B366 WP 904L Stainless Steel Socket weld fittings with Test Certificate, ASTM B366 WP 904L Stainless Steel Socket weld fittings manufacturers, ASTM B366 WP 904L Stainless Steel Socket weld fittings suppliers, ASTM B366 WP 904L Stainless Steel Socket weld fittings dealers, ASTM B366 WP 904L Stainless Steel Socket weld fittings mill, ASTM B366 WP 904L Stainless Steel Socket weld fittings price, ASTM B366 WP 904L Stainless Steel Socket weld fittings ready stock, used ASTM B366 WP 904L Stainless Steel Socket weld fittings, ASTM B366 WP 904L Stainless Steel Socket weld fittings manufacturing process, send your ASTM B366 WP 904L Stainless Steel Socket weld fittings requirement to our Mumbai, India office by email ashtapad@vsnl.net, ISO 9001, ISO 14001, OHSAS 18001 certified & Government Recognized Export House,

غير القابل للصدأ الأنابيب والتجهيزات الصلب الموردين في الإمارات العربية المتحدة